Oxygen 3000 Plus
Digital Broadcast Console
Axel Tech는 30년의 기술력과 노하우로 전문 라디오 및 TV 솔루션을 제공하는 업체입니다.
Oxygen 3000 Plus: much more than a Digital Broadcast Mixer!
A full range of powerful features for Radio On-Air and Production available in 3 different formats and flexible configurations: 8, 12 and 16 faders with 1 or 2 Audio I/O Boards and 16+16 or 32+32 Dante I/O.
Oxygen 3000 Plus is the best-equipped console of its category: Low Latency, Users Preset, Smart Keys, EQ, Compressors, Telephone Hybrid, HDMI Output, Analogue and Digital I/O, USB, Bluetooth, Dante AoIP, Telco, Presenter Talk Box, Streaming In/Out.
The DSP based processing guarantees high-end quality audio and of course you will find the easiness of use that marks all the AxelTech’s products.
Oxygen Remoter Software, which enables up to 8 additional virtual faders for a full I/O control is available on Oxygen 3000 Plus as it is, for free, in any Oxygen Digital Console model.
Analog Balanced Microphone Inputs
Connector : RJ45 & XLR Balanced – EMI Suppressed
Input Impedance : 2,4 KΩ
Nominal Input Level (sensitivity) : -9/-66 dBu
Max Input Level (clipping point) : +9 dBu
A/D conversion : 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level) : >110 dB
THD+N : <0,01%
Analog Gain : Adjustable +0 ÷ +60 dB (3dB step)
Phantom Power : +48V
Analog Balanced Stereo Inputs
Connector : XLR & RJ45 Balanced – EMI Suppressed
Input Impedance : 10 KΩ
Nominal Input Level (sensitivity) : 0 dBu
Max Input Level (clipping point) : +18 dBu
A/D conversion : 24 bit / 48 Khz
Frequency response : +/-0,5 dB from 20 Hz to 20 kHz
Signal To Noise Ratio (referred to peak level) : >110 dB
Stereo Separation (referred to peak level) : >90 dB
THD+N : <0,002 %
Analog Balanced Telco Input
Connector : RJ45 Balanced – EMI Suppressed
Input Impedance : 10 KΩ
Nominal Input Level (sensitivity) : 0 dBu
Max Input Level (clipping point) : +18 dBu
A/D conversion : 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level) : >110 dB
THD+N : <0,002%
Digital Input
Connector : Balanced on 1 XLR – EMI Suppressed
Input Impedance : 110Ω
Standard : AES3
Audio Sample Rate : 32/44.1/48/96/192 KHz with SRC
Resolution : 24 bit
Dynamic Range (Converter Values) : 124dB
Analog Balanced Stereo Outputs
Connector : RJ45 Balanced – EMI Suppressed
Output Impedance : 23 Ω, nominal 600 Ω
Nominal Output Level : 0 dBu
Max Output Level (clipping point) : +18 dBu
D/A conversion : 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level) : >110 dB
Stereo Separation (referred to peak level) : >90 dB
THD+N : <0,002 %
Dante I/O
Sample Rates (16x16 Versions) : 44.1/48/88.2/96 kHz
Sample Rates (32x32 Versions) : 44.1/48/88.2/96 kHz
Audio Flows In/Out : Up to 32x32 simultaneous streams
Digital Audio Formats : TDM, I2S
Audio Transport Formats : Dante Audio over IP, AES67 RTP, SMPTE ST2110-30 RTP (enrolled devices)
Sample Bit Depth : 16, 24 or 32 bits per sample
Audio Buffering : Up to 2000 samples per channel
Clocking : Onboard word clock or external word clock
Form Factor : Card edge module. 4.5cm x 6cm (1.75” x 2.4”)
FPGA : High performance Xilinx Spartan6 FPGA
Microprocessor : Soft-core Microblaze processor
Clock : High quality, low jitter onboard SiLabs
Ethernet : Standard RGMII/MII interface for Ethernet PHY or switch chip
Power : 3.3VDC @ 2W max
Physical Connector : Mini-PCI
Control Interfaces : SPI Master and Slave; GPIO; I2C
Network : RGMII/MII
USB Audio Digital I/O
Connector : USB Type B – EMI Suppressed
Playback And Recording Sample Rate : SRC 44.1-48 KHz
Resolution : 16 bit
Available Stereo Channels : 2 stereo USB - 2 Inputs & 1 Output on each Audio I/O Board
Analog Balanced Talkbox Outputs
Connector : RJ45 balanced – EMI Suppressed
Output Impedance : 100ohm, nominal 600ohm
Nominal Output Level : 0dBu
Max Output Level (clipping point) : +14dBu
D/A conversion : 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level) : >110dB
Stereo Separation (referred to peak level) : >90dB
THD+N : <0,05%
Analog Balanced Telco Output
Connector : RJ45 Balanced – EMI Suppressed
Output Impedance : 23 Ω, nominal 600 Ω
Nominal Output Level : 0 dBu
Max Output Level (clipping point) : +18 dBu
D/A conversion : 24 bit / 48 Khz
Signal To Noise Ratio (referred to peak level) : >110 dB
THD+N : <0,002 %
Digital Output
Connector : Balanced on 1 XLR – EMI Suppressed
Input Impedance : 110 Ω
Standard : AES3
Audio Sample Rate : 32/44.1/48/96/192 KHz
Resolution : 24 bit
Dynamic Range (Converter Values) : 124 dB
PSTN Interface
Connector : RJ11
Transhybrid loss : >20 dB
System
Audio Core : Analog Devices ADAU1452 32bit 294 MHz fixed point DSP
Audio CODECsCirrus : CS42448 24 bit/192 kHz
LAN Connection : RJ45 - 1 Gbit
Nominal Delay (analog input to analog output) : 0,7 ms
GPIO Inputs/Outputs : 4 GPI/4 GPO on DB9; 4 GPI/2 GPO on Mic2 & Mic3 RJ45; 2 GPO on Out3 & Out4 RJ45; 1 GPI/1 GPO on Telco RJ45
Communication Port : 2xUSB type-A, 2xUSB type-B , 1xLAN, 1xHDMI
Operating Temperature : 0°C ÷ 40°C
Dimensions
8 Faders Dimensions (W; H; D) : 584 mm; 113,5 mm; 495,5 mm
12 Faders Dimensions (W; H; D) : 764 mm; 113,5 mm; 495,5 mm
16 Faders Dimensions (W; H; D) : 944 mm; 113,5 mm; 495,5 mm
Weight : 15 to 25 Kg
PSU
Type : External Universal Switching Power Supply 12V with 4 poles XLR connections - Optional Redundant
Power Supply : 90-264 VAC / 50-60 Hz / 120 W